manualshive.com logo in svg

RADVision L2W-323, User Manual

The RADVision L2W-323 user manual is available for download absolutely free! This comprehensive manual provides detailed instructions, tips, and troubleshooting guidance for efficiently operating the RADVision L2W-323 product. Get your copy now from our website and unlock the full potential of your device!

Share
Download
background image

Installing the L2W-323 Gateway 

3-8 

V.35 WAN Connections 

There are two different WAN serial cables you can use to connect the Gateway V.35 ports. 
The cables you use depend on the type of V.35 module and on the dialing standard 
supported by connection device: 

 Port 

Connection Cable 

Dialing Standard 

Connection To… 

V.35 DTE 

DTE mode V.35/RS-366 

RS-366 

IMUX and terminal 
adapter  

V.35 DCE 

DCE mode V.35/RS-366 

RS-366 

DTE device (such as 
an MCU) 

 

The WAN serial cables are not supplied with the L2W-323 Gateway. For the connector pin-
outs and details, see Appendix A, “Cable Connectors and Pin-outs.” 

#"

To connect the V.35 DTE ports to an IMUX or terminal adapter with a V.35/RS-366 
DTE cable 

1.  Connect the D-type 26-pin male connector of the V.35/RS-366 cable to one of the 

V.35 DTE ports.  

2.  Connect the V.35 male connector and the RS-366 male connector on the other end of 

the cable to the connecting device.  

#"

To connect the Gateway V.35 DTE ports to a modem in a dedicated connection 

1.  Connect the D-type 26-pin male connector of the V.35 cable to one of the V.35 DTE 

ports.  

2.  Connect the V.35 male connector on the other end of the cable to the modem device.  

#"

To connect the V.35 DCE ports to an H.320 device with an V.35/RS-366 DCE cable 

1.  Connect the D-type 26-pin male connector of the V.35/RS-366 DCE cable to one of 

the V.35 DCE ports.  

2.  Connect the V.35 female connector and the RS-366 female connector on the other end 

of the cable to the connecting device.  

Dedicated Connections 

In a dedicated connection, the Gateway connects to another gateway or to an H.320 terminal 
via modems. The Gateway uses a dedicated protocol for this connection.  

Summary of Contents for L2W-323






























































































































































































































































Reviews:

No comments

Related manuals for L2W-323

Vantron VT-M2M-BTA-DE User Manual preview
VT-M2M-BTA-DE
Brand: Vantron Pages: 52
Star-net FT5X Installation And User Manual preview
FT5X
Brand: Star-net Pages: 31
TANDBERG Codian GW 3201 Series Getting Started preview
Codian GW 3201 Series
Brand: TANDBERG Pages: 18
BEANAIR WILOW-IOT-GATEWAY-4G Quick Start Manual preview
WILOW-IOT-GATEWAY-4G
Brand: BEANAIR Pages: 29
Advantech EKI-1200-CE Series User Manual preview
EKI-1200-CE Series
Brand: Advantech Pages: 67
SystemAir RS485 User Manual preview
RS485
Brand: SystemAir Pages: 16
TP-Link Deco X50-4G User Manual preview
Deco X50-4G
Brand: TP-Link Pages: 63
Endress+Hauser FieldGate SWG50 Operating Instructions Manual preview
FieldGate SWG50
Brand: Endress+Hauser Pages: 48
2Wire 3600 Manual preview
3600
Brand: 2Wire Pages: 82
Encom Harmony IP I/O8 User Manual preview
Harmony IP I/O8
Brand: Encom Pages: 44
OWL INTUITION Getting Started preview
INTUITION
Brand: OWL Pages: 16
Watchguard Firebox X1000 Hardware Manual preview
Firebox X1000
Brand: Watchguard Pages: 18
ActionTec GT704WGB Specifications preview
GT704WGB
Brand: ActionTec Pages: 4
TECOM IG6600 Quick Installation Manual preview
IG6600
Brand: TECOM Pages: 5
Arris Touchstone DG2460 User Manual preview
Touchstone DG2460
Brand: Arris Pages: 38
Rosslare AY-B1663 Installation Manual preview
AY-B1663
Brand: Rosslare Pages: 20
FaceTime Unified Security Gateway Quick Start Manual preview
Unified Security Gateway
Brand: FaceTime Pages: 2
Planet BM-525 User Manual preview
BM-525
Brand: Planet Pages: 205

Brands by name

Popular brands

Load more brands