RADVision L2W-323, User Manual

Page: 101 / 253

Setting the Gateway Parameters
5-25
Adding a New Service
#"
To add a new service to the Services Definition Table
1. From the Services Definition Table screen, click Add . The Service Settings screen is
displayed, for example:
Figure 28 - Defining service settings
2. In the Description text box, type a description for this service.
3. In the Call Type list box, select the appropriate type of call.
4. In the Prefix text box type the prefix for this service.
5. From the Max. Bit Rate per channel list box select the appropriate value for this
service. If you are defining a voice-only service, this parameter is disabled.
6. If your lines or the destination lines are restricted, ( n x 56) select the Restricted Mode
check box.
7. Click OK to add this service to the Services Definition Table.