RADVision L2W-323, User Manual

Page: 102 / 253

Basic Configuration
5-26
Editing an Existing Service
#"
To edit the parameters of an existing Service
1. From the Services Definition Table screen select the service you want to edit and click
Edit . The Service Settings screen is displayed.
2. Make the desired changes, and then click OK to confirm and return to the Services
Definition Table screen.
Deleting an Existing Service
#"
To delete an existing service from the Services Definition Table
1. Select the service you want to delete and click Delete . The selected service is deleted
from the Services Definition Table screen and the Gateway no longer supports this
service.
2. Click Next . The WAN Port Settings screen is displayed.
Modified or new services are available to LAN endpoints only after you do the following:
!"
Upload the configuration settings to the Gateway.
!"
Define the same services for the Gatekeeper.
!"
Re-register the Gateway with the Gatekeeper.
Setting WAN Port Parameters
The WAN Port Settings screens allow you to define parameter settings for the WAN ports.
Two WAN Port Settings screens display for each installed WAN module (ISDN and/or
V.35). If you installed only one WAN module, a WAN Port Does Not Exist screen is
displayed instead of the missing ports. The WAN Port Settings screens are displayed
starting from the module inserted in slot MW1.