Connecting the Cables
3-11
Connecting through a Modem
You can connect the L2W-323 Gateway to a terminal via modems for remote diagnostics.
The external modem connected to the Gateway should be a standard modem and should be
configured as follows:
!"
Baud rate:
9600
!"
Data bits:
8
!"
Stop bits:
1
!"
Parity: none
!"
Flow control:
none
!"
Auto answer:
on
!"
Carrier Detect (CD):
on
!"
Data Terminal Ready (DTR):
on
!"
Echo enabled:
on
#"
To connect the Gateway console port to a modem
1. Verify the modem configuration parameters are as specified in “Connecting through a
Modem.”
2. Connect the 9-pin male connector of the cable to the Gateway console port.
3. Connect the 25-pin female connector on the other end of the cable to the modem.
4. For remote diagnostics, create a normal dial-up connection. For information, see
“Creating a Dial-Up Connection to the Gateway” in Chapter 8, “Servicing the
Gateway.”
Summary of Contents for L2W-323
