RADVision L2W-323, User Manual

Page: 71 / 253

Running Setup
4-7
Navigating the Configuration Software Screens
The configuration software comprises of sequential screens that can be accessed through the
Next and Prev buttons. Some screens also have secondary screens that are accessed through
buttons, identified by the name of the screen they invoke. For example, the WAN Call
Parameters screen is a secondary screen of the WAN Port Settings screen and can be
accessed from the
WAN Call Parameters button on this screen. Following is a description
of the configuration software navigation buttons.
Button Shortcut Key Action
Gateway
Abort Alt+A
Exits the Configuration program without saving your
changes.
Next Alt+N
Moves to a subsequent screen, saving any changes you
made.
Prev Alt+P
Moves to a previous screen. If you exit a dialog box
using Prev, changes you make to the information in the
dialog box are saved.
Finish Alt+F
Allows you to save the configuration settings in a file and
upload these settings to the Gateway.
Detect Alt+D
Sends a broadcast message to the network, requesting
identification from any units that have not yet identified
themselves.
Gatekeeper
Load Alt+L
Loads a locally saved file.
Save Alt+S
Saves parameter values of the dialog box to the local
disk as a text file in the directory where you installed the
Configuration Software.
Apply
Saves the information to the Gatekeeper without exiting
the Configuration dialog box.