RADVision L2W-323, User Manual

Page: 164 / 253

Using the L2W-323 Gateway
7-8
Changing the Bandwidth of Incoming Calls
When making V.35 WAN-to-LAN calls through an L2W-323 Gateway that is defined as
DCE, you can force the bandwidth of calls you send to the Gateway by adding the following
call prefixes to the number dialed:
To Force Calling
Bandwidth to:
Use Prefix:
2 x 64 Kbps (2B) #00
128 Kbps #10
256 Kbps #20
384 Kbps #30
786 Kbps #70
2 x 56 Kbps (2B) (restricted) #01
112 Kbps (restricted) #11
224 Kbps (restricted) #21
336 Kbps (restricted) #31
672 Kbps (restricted) #71
Note: You must add the dialing prefix at the very beginning of the dialing string.
Dialing Examples
When making a call at 768 Kbps, dial:
!"
The dialing prefix , followed by
!"
The endpoint’s phone number .
Example
#70 1234567
Where #70 is the prefix that forces the bandwidth to 768 Kbps and 1234567 is the phone
number of the endpoint you are calling.
Note: In cases when you are prompted by an IVR voice message, follow the voice prompt to
connect to the LAN endpoint.