manualshive.com logo in svg

RADVision L2W-323, User Manual

The RADVision L2W-323 user manual is available for download absolutely free! This comprehensive manual provides detailed instructions, tips, and troubleshooting guidance for efficiently operating the RADVision L2W-323 product. Get your copy now from our website and unlock the full potential of your device!

Share
Download
background image

FCC Part 68 Customer Instructions 

E-2 

RENs should not exceed five (5.0). To be certain of the number of devices that may be 
connected to a line, as determined by the total RENs, contact the local telephone company. 

Note:  The REN is not applicable to the RADVision L2W-323 Gateway product. If 

requested, this information must be given to the telephone company. 

3.  Facility Interface Information 

In order to connect registered terminal equipment to the telephone company lines, the 
terminal equipment must utilize FCC registered jacks. Standardized jacks are used for this 
equipment.  

The following tables list facility interfaces, manufacturer’s network interface port 
designations, service codes, and network jacks for digital ISDN BRI services. 

Digital Facility 
Interface 

Manufacturing Network 

Interface Port Designation 

Service 
Code 

Network Jack 

02IS5 

MW-BRI-2 

6.0P 

N/A* 

02IS5 

MW-BRI-2-EC 

6.0P 

N/A* 

 

* The MW-BRI-2 and MW-BRI-2-EC interfaces are connected to the public switched 
telephone network through FCC registered Network Termination (NT1) which specifies the 
type of network jacks to be used.  

4.  Disruption of the Network 

If the RADVision L2W-323 Gateway product disrupts the telephone network, the telephone 
company can discontinue your service temporarily. If possible, the telephone company will 
notify you in advance. If advance notice is not practical, they will notify you as soon as 
possible. You are also informed of your right to file a complaint with the FCC. 

5.  Telephone Company Facility Changes 

The telephone company can make changes in its facilities, equipment, operations, or 
procedures that can affect the operation of your equipment. If they do, you should be 
notified in advance so you have an opportunity to maintain uninterrupted telephone service. 

6.  Nonlive Voice Equipment 

Nonlive voice equipment such as music-on-hold devices and recorded announcers for 
systems must be approved by RADVision Ltd and registered in accordance with the rules 
and regulations of Subpart C of the FCC Rules, Part 68, or it must be connected through 
protective circuitry registered in accordance with the rules and regulations in Subpart C of 
the FCC Rules, Part 68. 

Summary of Contents for L2W-323






























































































































































































































































Reviews:

No comments

Related manuals for L2W-323

Arris Touchstone TG1652 User Manual preview
Touchstone TG1652
Brand: Arris Pages: 44
DAUDIN iO-GridM GFGW-RM02N User Manual preview
iO-GridM GFGW-RM02N
Brand: DAUDIN Pages: 28
Ubiquiti UniFi UDM Quick Start Manual preview
UniFi UDM
Brand: Ubiquiti Pages: 19
VisionNet M605N User Manual preview
M605N
Brand: VisionNet Pages: 102
YX Wireless TELULINK User Manual preview
TELULINK
Brand: YX Wireless Pages: 12
PheeNet WAS-101 Quick Start Manual preview
WAS-101
Brand: PheeNet Pages: 14
ZyXEL Communications P-324 User Manual preview
P-324
Brand: ZyXEL Communications Pages: 352
Moxa Technologies AIG-501-T-AZU-LX Quick Installation Manual preview
AIG-501-T-AZU-LX
Brand: Moxa Technologies Pages: 8
Net2Phone MAX 400 Series Command Reference Manual preview
MAX 400 Series
Brand: Net2Phone Pages: 129
Zennio KLIC-FJ vT User Manual preview
KLIC-FJ vT
Brand: Zennio Pages: 35
Aaeon SRG-APL User Manual preview
SRG-APL
Brand: Aaeon Pages: 26
Infranet Technologies M2M CONTROL CX530 Technical Manual preview
M2M CONTROL CX530
Brand: Infranet Technologies Pages: 36
Bticino L4500C Manual preview
L4500C
Brand: Bticino Pages: 4
LG PI 485 Installation Manual preview
PI 485
Brand: LG Pages: 11
LG AC Smart BACnet Installation & Owner'S Manual preview
AC Smart BACnet
Brand: LG Pages: 88
LG BECON HVAC BACnet PQNFB17C0 Installation & Owner'S Manual preview
BECON HVAC BACnet PQNFB17C0
Brand: LG Pages: 118
LG ACP BACnet Installation And User Manual preview
ACP BACnet
Brand: LG Pages: 220
LG BNU-BAC Owner'S Manual preview
BNU-BAC
Brand: LG Pages: 481

Brands by name

Popular brands

Load more brands