Quantum DXi4701 User Manual Download Page 391

Page: 391 / 440

Chapter 10: DXi4701 Utilities

Diagnostics

Quantum DXi4701 User’s Guide

365

The

General

page displays the following information about the most

recently run healthchecks:

•

Status

- The status of the healthchecks (

In Progress

Success

Failed

, or

Interrupted

•

Progress

- The percentage complete of the healthchecks.

•

Start Time

- The time the healthchecks started.

•

End Time

- The time the healthchecks ended.

Use the

General

page to perform the following tasks:

• To start all enabled healthchecks, click

Start

• To stop all healthchecks in progress, click

Stop

Status

The

Status

page allows you to view information about the most recent

test results for each healthcheck. You can also enable or disable a

healthcheck.
The following healthchecks are available:

•

De-Duplication

- Checks the overall health of the blockpool. This

healthcheck verifies that the metadata in the namespace file and the

data tags in the blockpool are correctly in sync.

•

Integrity

- Checks the integrity of data in the blockpool. This

healthcheck examines a sample of data tags in the blockpool and

verifies that the data has been properly stored without errors or

corruption.

To access the

Status

page, on the

Healthchecks

page, click the

Status

tab (see

Figure 201

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands