Quantum DXi4701, User Manual

Page: 94 / 440

Chapter 4: DXi4701 Configuration Wizards
VTL Wizard
68 Quantum DXi4701 User’s Guide
• Number of Virtual Tape Drives - Accept the default number of
tape drives (based on DXi model), or enter the number of virtual
tape drives in the partition.
Note: If all tape drives are currently assigned to other
partitions, you must remove one or more tape drives
from an existing partition to make them available for
use in a new partition.
• Enable deduplication - Select the check box to enable data
deduplication. Quantum recommends that you enable data
deduplication to optimize disk usage.
Note: Data deduplication is enabled by default. You cannot
enable or disable data deduplication after the partition
is added.
2 Click Add .
3 (Optional) To add additional partitions, repeat Steps 1–2.
4 Click Next to continue.
Figure 36 VTL Wizard: Add
Partition