Quantum DXi4701, User Manual

Page: 333 / 440

Chapter 9: DXi4701 Configuration
System
Quantum DXi4701 User’s Guide 307
Note: The DNS Suffix Search List and DNS IP Addresses cannot be
modified if the DXi4701 is currently joined to a Windows
domain. To disjoin a Windows domain, see Windows Domain
on page 211.
Configuring Bonding Details
Under IP Address Configuration > Bonding Details , configure bonded
devices (see Figure 166 ):
Figure 166 Network Page:
Bonding Details
1 If necessary, click the Show link to show the bonding details table.
2 For each available bonded device ( bond0 , bond1 , and so on), select
two or more Ethernet ports with the same link speed to assign to
the bond. Or select Not Bonded to leave a port unassigned to any
bond.
If no ports are assigned to a bond, the bond cannot be configured.
That is, settings cannot be entered for the bond in the Interface
Details or IP Address tables because no Ethernet ports are assigned
to the device.
All ports assigned to the same device are bonded together into a
single logical port. For example, if you select bond0 for port eth0
and port
eth1
, both ports are bonded together in the
bond0
device. A bonded device can contain two or more ports.
Note: All ports associated with a bond must have the same link
speed (1GbE or 10GbE).
3 For each bonded device, specify the bonding mode: