Quantum DXi4701, User Manual

Page: 271 / 440

Chapter 9: DXi4701 Configuration
VTL
Quantum DXi4701 User’s Guide 245
The LUN assignment displays next to the device.
4 Click Apply .
Deleting a Remote Host Access Group
Delete a host access group if it is no longer needed.
To delete a host access group:
1 Select the group and click Delete .
Note: You can select multiple groups to delete at once.
2 Click Yes to confirm the deletion.
Remote Hosts
Use the Remote Hosts page to discover and add Fibre Channel hosts to
the available host list for the DXi4701.
Note: You must configure a host before you can assign it to a new
host access group (see Adding a Remote Host Access Group on
page 242).
Caution: If you are connecting the DXi4701 directly to a host
without using a Fibre Channel switch, you must know the
WWPN connecting to each DXi4701 port. If you do not
specify this information, the virtual medium changer and
tape drives will not display on the device manager.
To access the
Remote Hosts
page, on the
Remote Host Access
page,
click the
Remote Hosts
tab (see Figure 136 ).