Quantum DXi4701, User Manual

Page: 335 / 440

Chapter 9: DXi4701 Configuration
System
Quantum DXi4701 User’s Guide 309
Configuring Interface Details
Under IP Address Configuration > Interface Details , configure jumbo
Ethernet frame settings for each port or device (see Figure 167 ):
Figure 167 Network Page:
Interface Details
1 If necessary, click the Show link to show the interface details table.
2 For each device, select the MTU (Maximum Transmission Unit) frame
size in the Jumbo Frame MTU Size drop-down box.
• 1500 MTU - (Default) The standard (STD) MTU frame size of
1,500 bytes is used.
• 9000 MTU - The jumbo MTU frame size of 9,000 bytes is used.
(For best performance, make sure the entire network path to
the DXi is configured to use 9000 MTU.)
3 Click Update to save the changes you made to the Interface Details
table. (Clicking Update does not yet apply the new network settings
to the DXi4701.)
Click
Undo to revert to all current Interface Details changes to the
last update.
Configuring Interface IP Addresses
Under IP Address Configuration > IP Address Table , configure one or
more network interfaces for each port or device (physical Ethernet port
or bonded device) (see Figure 168 ):