Quantum DXi4701, User Manual

Page: 113 / 440

Chapter 4: DXi4701 Configuration Wizards
Replication Wizard
Quantum DXi4701 User’s Guide 87
Figure 49 Replication Wizard:
NAS Shares
Step 3: VTL Partition
(DXi4701 VTL configurations only)
1 Select a VTL partition in the Replication Settings for VTL Partitions
section to manage its replication settings (see Figure 50 ).
Note:
For help adding VTL partitions to the system, use the
VTL
Configuration Wizard (see VTL Wizard on page 65).
2 To configure the partition to replicate its data to another DXi
system, enter the following information under Send :
a Select the Enable replication for selected partition check box
to enable replication for the partition.
b (Optional) Select the Enable Cartridge based replication to
target check box to enable Cartridge Based Replication for the
partition, and then enter a Sync ID in the box.
With Cartridge Based Replication, a cartridge is automatically
replicated when it is unmounted. After replication, the
replicated cartridges are immediately available on the target
system.