Quantum DXi4701, User Manual

Page: 283 / 440

Chapter 9: DXi4701 Configuration
Replication Configuration
Quantum DXi4701 User’s Guide 257
Figure 142 Replication
Throttle
2 Select the Enable system throttling check box.
Or clear the check box to disable system throttling.
3 In the Throttle box, enter the maximum allowed bandwidth, and
select the units you want to use to specify the constant throttle
( KB/s or MB/s ). The lowest value you can set is 32 KB/s. The highest
value you can set is 125 MB/s.
4 Click Apply .
Caution: Do not set the maximum allowed bandwidth to a value
that is lower than necessary. If the maximum allowed
bandwidth is set to the lowest value, large replication
jobs may fail.
Source DXis List
The Source DXis list displays the following information for each source
DXi:
• Source - The IP address of the source system that is allowed to send
data to the DXi4701.
• Actual Data Received - The amount of data actually received over
the network during replication or failback.
• Average Receive Rate - The average receive rate (in MB/s) of data
received over the network during replication or failback ( Actual
Data Received divided by the amount of time required to complete
replication or failback).