Quantum DXi4701 User Manual Download Page 101

Page: 101 / 440

Chapter 4: DXi4701 Configuration Wizards

OST Wizard

Quantum DXi4701 User’s Guide

To begin the

OST

wizard, on the

Wizards

menu, click

OST

Step 1: About

Read the information about the wizard (see

Figure 41

The

About

page displays the status of the OST service. OST settings

can be configured in

Ready

Stopped

, or

Verifying

state. The OST

server is available for backup only in

Ready

state.

Click

Next

to continue.

Note:

At any time while using the wizard, you can click

Previous

return to the previous step.

Figure 41 OST Wizard: About

Step 2: Add Storage

Servers

Under

Add Storage Server

, enter information about the storage

server (see

Figure 42

•

Name

- Enter the name of the storage server.

Caution:

Do not use an underscore ( _ ) in the name of the

storage server.

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands