Quantum DXi4701 User Manual Download Page 202

Page: 202 / 440

Chapter 7: DXi4701 Status
Performance

176

Quantum DXi4701 User’s Guide

Figure 97 Ethernet Page

Use the

Ethernet

page to display recent network activity in dynamic

graphs:

• The top graph reports data received and the bottom graph reports

data sent.

• Select the port to monitor in the

Ethernet

drop-down box, or select

Avg

to display an average of all ports.

• The horizontal axis displays time (0–100 seconds).
• The vertical axis displays data throughput (0–125 MB/s).

Note:

For DXi4701 models that include 10GbE Ethernet ports, the

vertical axis displays data throughput as 0–1.25 GB/s.

• Values that exceed the maximum value of the vertical axis are

shown in lighter green.

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands