Quantum DXi4701, User Manual

Page: 164 / 440

Chapter 6: DXi4701 Replication
Receive NAS
138 Quantum DXi4701 User’s Guide
Note: Before you can failback a share, on the original source system,
you must add the original target system to the list of allowed
replication sources (see Adding a Replication Source on
page 258). This is because, during failback, the original target
is acting as a source when it sends a snapshot to the original
source.
To perform a share failback:
1 On the target system, select a snapshot in the Snapshots List and
click Failback .
The Failback Target page displays (see Figure 74 ).
Figure 74 Failback Target Page
2 (Optional) In the Failback Destination DXi box, type the hostname
or IP address of a new destination system to failback the share to.
(The default destination is the original source system.)
Note: To use hostname format, you must specify at least one DNS
IP address on the Network page (see Network on
page 303).
3 (Optional) Leave the Use Encryption check box selected to enable
encryption when sending the snapshot to the destination. Or clear
the Use Encryption check box to disable encryption when sending
the snapshot to the destination.