Quantum DXi4701 User Manual Download Page 97

Page: 97 / 440

Chapter 4: DXi4701 Configuration Wizards

VTL Wizard

Quantum DXi4701 User’s Guide

•

Alias

- Enter a descriptive alias for the host.

Click

Apply

(Optional) To discover additional hosts, repeat Steps 1–3.

Click

Next

to continue.

Figure 38 VTL Wizard: Discover
Remote Hosts

Step 5: Map Remote

Hosts

Enter information about the host access group (see

Figure 39

•

Group Name

- Enter a name for the group.

•

Partition

- Select the partition to associate with the group.

•

Remote Host

- Select the host (initiator) to associate with the

group.

•

Target

- Select the target (port) to associate with the group.

The

Backpanel Locations

section displays a graphical

representation of the Fibre Channel and Ethernet ports as they

appear on the rear of the system. A dark border displays around

the currently selected target.

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands