Quantum DXi4701 User Manual Download Page 153

Page: 153 / 440

Chapter 6: DXi4701 Replication

Replication Send

Quantum DXi4701 User’s Guide

127

Or clear the

Enable Replication

check box to disable replication for

the share or partition. Any jobs from that share or partition that are

in progress or queued will transition to failure. Also, all replication

job history for that combination of target and share or partition will

be removed.

Select the check box for each replication target you want to

replicate the share or partition to. (You must select at least one

target.) When the share or partition is replicated, its data will be

sent to all selected targets.

Click

Apply

Note:

Quantum recommends scheduling replication to run after

backups are complete (see

Scheduling a Share or Partition For

Replication

on page 133). If you do not enable scheduled

replication, replication will only occur if you manually replicate

a share or partition (see

Replicating a Share or Partition

page 130) or if you configure Directory/File Based Replication

(see

Configuring Directory/File or Cartridge Based Replication

on page 127).

Note:

Disabling replication for a share or partition does not delete

any scheduled replication events for that share or partition. If

you no longer want to schedule the share or partition for

replication, manually delete the schedule (see

Deleting a

Scheduled Event

on page 302).

Configuring Directory/

File or Cartridge Based

Replication

Configure a NAS share or VTL partition for Directory/File or Cartridge

Based Replication to automatically replicate files or cartridges to other

DXi systems (the targets). A file is automatically replicated when it is

closed or a period of time after it is modified. A cartridge is

automatically replicated when it is unmounted. After replication, the

replicated files or cartridges are immediately available on the target

systems. There is no need to recover the share or partition to make the

files or cartridges available. Disable Directory/File or Cartridge Based

Replication if you do not want to automatically replicate files or

cartridges.
When you configure a share or partition for Directory/File or Cartridge

Based Replication, you must specify a Sync ID. The Sync ID associates the

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands