Quantum DXi4701 User Manual Download Page 96

Page: 96 / 440

Chapter 4: DXi4701 Configuration Wizards
VTL Wizard

Quantum DXi4701 User’s Guide

Figure 37 VTL Wizard: Add
Media

Step 4: Discover

Remote Hosts

Click

Discover Remote Hosts

to list all hosts that are known to the

DXi4701 in the table (see

Figure 37

A host is made known to the DXi4701 if you enter the host ID on

this page, or if the host logs on to one or more Fibre Channel target

ports.
If you do not see the world wide name (WWN) of the host, make

sure the host is connected to a Fibre Channel port on the DXi4701

and click

Discover Remote Hosts

again.

The

Backpanel Locations

section displays a graphical

representation of the Fibre Channel and Ethernet ports as they

appear on the rear of the system.

Note:

Active

status indicates the host is currently logged on

to one or more Fibre Channel target ports.

Enter information about the host:

•

Remote Host WWPN

- Enter the World Wide Port Name

(WWPN) of the host.

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands