![background image](http://html1.mh-extra.com/html/quantum/dxi4701/dxi4701_user-manual_3746338178.webp)
Chapter 6: DXi4701 Replication
Receive VTL
152
Quantum DXi4701 User’s Guide
Figure 82 Failback Target Page
2
(Optional) In the
Failback Destination DXi
box, type the hostname
or IP address of a new destination system to failback the partition
to. (The default destination is the original source system.)
Note:
To use hostname format, you must specify at least one DNS
IP address on the
Network
page (see
3
(Optional) Leave the
Use Encryption
check box selected to enable
encryption when sending the snapshot to the destination. Or clear
the
Use Encryption
check box to disable encryption when sending
the snapshot to the destination.
If encryption is enabled, select an encryption strength (
128-bit
or
256-bit
). Using 256-bit encryption (default) provides a stronger
level of security but may have an impact on system performance in
some situations.
Caution:
Select 128-bit encryption if you are sending data to a
DXi running a system software version prior to DXi 2.1
Software.
Note:
Encryption is enabled by default. However, for best
performance, if your data network is already secured, you
should clear the
Use Encryption
check box.
Summary of Contents for DXi4701
