Quantum DXi4701 User Manual Download Page 23

Page: 23 / 440

Preface

Quantum DXi4701 User’s Guide

xxiii

• 1 GB = 1,000,000,000 bytes
• 1 TB = 1,000,000,000,000 bytes

Product Safety

Statements

Quantum will not be held liable for damage arising from unauthorized

use of the product. The user assumes all risk in this aspect.
This unit is engineered and manufactured to meet all safety and

regulatory requirements. Be aware that improper use may result in

bodily injury, damage to the equipment, or interference with other

equipment.

WARNING:

Before operating this product, read all instructions and

warnings in this document and in the system, safety, and
regulatory guide.

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands