Quantum DXi4701 User Manual Download Page 125

Page: 125 / 440

Chapter 4: DXi4701 Configuration Wizards

Support Wizard

Quantum DXi4701 User’s Guide

Enter the authorization code (printed on the License Certificate) and

click

Get License Key

The

Licensed Feature

page returns a license key. Select the license

key and press

<Ctrl+C>

to copy it. You should also print out or

write down the license key, or save it to a text file, for future use.

Switch back to the

Support

wizard.

Enter the license key in the

New Key

box, and then click

Add

The license key is added to the system, and the new feature is

enabled.

(Optional) To add additional license keys, repeat Steps 1–7.

Click

Finish

to complete the

Support

wizard.

Figure 60 Support Wizard:
Licensed Features

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands