![background image](http://html1.mh-extra.com/html/quantum/dxi4701/dxi4701_user-manual_3746338280.webp)
Chapter 9: DXi4701 Configuration
Replication Configuration
254
Quantum DXi4701 User’s Guide
2
Select the target again and click
Edit
.
The
Edit Target Host
window displays (see
).
Note:
If you are editing a target, you cannot change the
Target
Hostname or IP
.
Figure 141 Edit Target Host
3
In the
Encryption
drop-down box, select the type of encryption to
use when sending replication data to the target system (
None
,
128-bit
, or
256-bit
).
Using 256-bit encryption (default) provides a stronger level of
security but may have an impact on system performance in some
situations. For best performance, if your data network is already
secured, you should select
None
for encryption.
Caution:
For encryption, select
None
or
128-bit
if you are
sending data to a DXi running a system software
version prior to DXi 2.1 Software.
4
In the
Source IP Address
box, enter the IP address that is used to
uniquely identify the source DXi to the target. This may be different
than the actual network IP address of the source DXi.
If the target system is at DXi 2.1 Software or higher, the
Source IP
Address
field is not required. If the target system is at DXi 2.0.1.x
Software or below, then you must enter the IP address by which the
target system recognizes the source system. The default value is
0.0.0.0
.
Summary of Contents for DXi4701
