background image

Chapter 9: DXi4701 Configuration
OST

272

Quantum DXi4701 User’s Guide

required data has already been replicated to the target storage 

server.

Note:

To configure the target DXi, se

Adding a Replication 

Target

 on page 251.

Note:

When Concurrent Optimized Duplication is enabled, all 

data on the storage server is duplicated, not just the 

specified images.

3

Select the check box for each optimized duplication target you want 

to duplicate the storage server to. When the storage server is 

duplicated, its data will be sent to all selected targets.

4

Click 

Apply

.

Deleting a Storage Server

Delete a storage server if it is no longer needed. When you delete a 

storage server, all data stored on the storage server is lost.

Note:

If you deleted the storage server from Symantec NetBackup or 

Symantec Backup Exec, you must wait several minutes before 

deleting the storage server from the DXi4701.

To delete a storage server:

1

Select the storage server in the 

Storage Server List

.

You cannot delete a storage server if it has more than zero currently 

active connections. The number of active connections is displayed 

on the 

OST

 page (see 

Storage Server List

 on page 265). Also, you 

cannot delete a storage server if it contains LSUs. Before deleting 

the storage server, you must first delete any LSUs it contains (see 

Deleting an LSU

 on page 279).

Note:

You can select multiple storage servers to delete at once.

2

Click 

Delete

.

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Reviews: