Quantum DXi4701 User Manual Download Page 116

Page: 116 / 440

Chapter 4: DXi4701 Configuration Wizards
Email Alerts Wizard

Quantum DXi4701 User’s Guide

Figure 51 Replication Wizard:
Confirm

Email Alerts Wizard

The

Email Alerts

wizard provides guided assistance for configuring the

DXi4701 to automatically send notifications and reports to selected
recipients. The wizard helps you configure an outgoing e-mail server.

Then the wizard guides you through the process of specifying e-mail

recipients and selecting the notifications and reports to send to the

recipients.

Note:

For more information about sending e-mail alerts, see

page 334.

To begin the

Email Alerts

wizard, on the

Wizards

menu, click

Email

Alerts

Step 1: About

Read the information about the wizard (see

Figure 52

Click

Next

to continue.

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands