background image

Chapter 3: DXi4701 Remote Management
The Remote Management Console

52

Quantum DXi4701 User’s Guide

Table 7  DXi4701 Model 
Number

Low Space Management

As disk capacity is used and free disk space approaches low levels, the 

DXi4701 automatically responds as detailed in 

Table 8

.

When the DXi4701 enters the 

Low Space

 state, space reclamation is 

automatically started to free up disk space. A space reclamation task is 

initiated every 10 minutes until space reclamation begins. Space 

reclamation ends when the DXi4701 exits the 

Low Space

 state. (Any 

space reclamation tasks running at that time are allowed to complete.)
When the DXi4701 enters the 

Critical Reserve Space

 state, backup 

ingest is stopped, and target replication to the system is paused. Backup 

ingest and target replication resume when the DXi4701 exits the 

Critical Reserve Space

 state.

Note:

The system generates a service ticket and an admin alert when 

it enters the 

Low Space

Critical Reserve Space

, and 

No Space

 

states. In addition, a service ticket and an admin alert are 

generated when Used Disk Space reaches 85% and 95% of 

total disk capacity.

DXi4701 Model Number

DXi4701 Configuration

DXi4701 - NAS/OST

5–135 TB usable for data storage
3 x 1 GbE Ethernet ports
(Optional) 2 x 10 GbE Ethernet 

ports

DXi4701 - VTL

5–135 TB usable for data storage
3 x 1 GbE Ethernet ports
(Optional) 2 x 10 GbE Ethernet 

ports
2 x 8 Gb Fibre Channel ports (for 

host or SAN connection)

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Reviews: