Quantum DXi4701 User Manual Download Page 198

Page: 198 / 440

Chapter 7: DXi4701 Status
Hardware

172

Quantum DXi4701 User’s Guide

•

Count

- The number of that component type in the system.

•

Status

- The status of the component.

•

Normal

- (Green) The component is operating correctly.

•

Attention

- (Yellow) There is a problem with the component.

•

Failed

- (Red) The component has failed.

The subcomponent section displays the following information about the

subcomponents in the selected component:

•

Component

- The name of the subcomponent.

•

Location

- The location of the subcomponent within the system.

•

Value

- The value reported by the subcomponent.

•

Status

- The status of the subcomponent.

•

Normal

- (Green) The component is operating correctly.

•

Attention

- (Yellow) There is a problem with the component.

•

Failed

- (Red) The component has failed.

Firmware Version

The

Firmware Version

page allows you to view information about

hardware components installed in the DXi4701, such as the firmware

version, hardware revision, and manufacturer.
To access the

Firmware Version

page, on the

Hardware

page, click the

Firmware Version

tab (see

Figure 95

Summary of Contents for DXi4701

























































































































































































































































































































































































































































Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands

Quantum DXi4701, User Manual

Search results

Summary of Contents for DXi4701

Reviews:

Related manuals for DXi4701

Brands by name

Popular brands