Kaleidescape, Inc.
December, 2020
Instructions for M700 and DV700 Optical Disk Drive (ODD)
Replacement
Title
KVault Optical Disc Drive Replacement
Time to Complete
30 minutes
Service Kit Parts
•
Slim Optical Disc Drive
•
Spare 1.5mm hex screws and washers for ODD
•
Tie-wrap
Tools Required
•
4mm hex screwdriver or Allen Key
•
2.5mm hex screwdriver or Allen Key
•
2mm hex screwdriver or Allen Key
•
1.5mm hex screwdriver or Allen Key
•
Phillips screwdriver
•
Container for collecting screws as they are removed
•
Disc storage for safely collecting removed discs
•
Fine-tip felt marker (required for A-Frame Only)
Overview
Follow this procedure to replace the optical disc drive in a Kaleidescape
Vault. There are two optical drive bracket configurations that were used with
the vaults: the original and new A-Frame ODD mounting bracket that was
updated in June 2016. Identifying the version and replacement procedures
for both are covered by this document.
The steps to follow are:
Transfer Mounting Brackets to New Optical Disc Drive
Install New Optical Disc Drive
Calibrate the Optical Disc Drive Position
Mark the Locations of the Bracket
