Mi14-01A Page 29 / 31
Rev: June 26, 2014
1. Perform the first lift as instructed in paragraph
3.2 if not already done.
2. Retract the tow truck stinger arm.
3. Pre-adjust spacing between the axle fork
holders to
43 inches
.
FIG.59
4. Install either long or short axle forks into fork
holders.
or
TALL REGULAR
5. Deploy the tow truck stinger arm. Place the
axle forks under the rear tow eyes if equipped
or under the side-members (fig.60 & 61).
Place the forks in a transversal position i.e.
perpendicularly to the side-members (fig.61).
FIG.60 REAR TOW EYES ON SIDE-MEMBERS LOCATED
UNDER ENGINE CRADLE SUPPORT RAILS
