SECTION 18: BODY
58
DOB 2490-2789 | X3-45 Commuter PA1605 Maintenance Manual (Final Version – Rev.2 April 2016)
3.05
Install 1/8 X ½” foam tape onto middle reinforcement then
compress.
3.10
Apply Sika 252
–
Onto vehicle surface
–
Cut nozzle as per template
–
Use the guide for the application
Bead must be continuous for the whole perimeter.
Section A-A Section B-B Section C-C
3.15
A)
Install side panel onto support jig.
B)
Position side panel in front of vehicle structure
Section A-A
Section B-B
C)
Perform final adjustment to make sure that side
panel is true and square
–
30 mm. ± 2 with reference to bottom
tubing
–
6 mm ± 1 with reference to vertical tubing
D)
Sand rear of side panel 2" wide
E)
Perform tig spot welding (1” apart)
Quantity of "tig spot": 30 minimum.
