PREVOST X3-45 COMMUTER, Maintenance Manual

Page: 400 / 549

SECTION 18: BODY
30
DOB 2490-2789 | X3-45 Commuter PA1605 Maintenance Manual (Final Version – Rev.2 April 2016)

From inside the door, apply some Sika
252 at the corners of window wiper.

Apply some #680066 glue inside finishing
panel groove and fix power window wiper.
NOTE
Anti-friction side must be on glass side.

Discard waste according to applicable
environmental regulations, use dangerous
waste containers.
Electrical Power Window

Insert 2 seals in the window frame.

Apply some #680066 glue at the intersec-
tion of the 2 seals and also sparingly in
order to fix the seal to the window frame.

Clean window using window cleaner.

Insert window into frame.

Secure window pane to raising
mechanism.

Adjust window travel (6±3mm above
window wiper).
Driver’s Window Gutter

Dry fit the gutter on the vehicle. If required,
straighten up gutter using a hammer and a
wooden block.