Mi14-01A Page 21 / 31
Rev: June 26, 2014
2.2.3
Second Lift- Front Axle as Lifting Point for Towing
This method uses the front axle as lifting point for towing (see fig.12-15).
1. Perform the first lift as instructed in
paragraph 2.2.1 if not already done.
2. Install regular axle forks onto tow bar
fork holders.
TALL REGULAR
Pre-adjust spacing between axle
forks
Minimum spacing: 25 inches
Maximum spacing: 33 inches
FIG.43
3. Lower the stinger arm to position the
axle forks under the front axle hoisting
points (fig.12-15).
4. Lift the tow bar until the axle forks grab
the front axle I-beam at the hoisting
points (fig.44 & 45).
5. Raise the front of the bus.
FIG.44
