MI14-40B / Page 9 / 10
<QF7720955 rev 2>
18. Apply torque seal according to normal procedure. Apply anti-corrosion compound on alternator
terminals and cable ring terminals or use color guard rubber coating #684013 if available.
19. Reinstall the A/C compressor idler pulley bracket assembly (figure 12). Apply Loctite 243 on
threads. Reinstall the A/C compressor belts.
FIGURE 12
20. Finally, check that all cables are properly installed, start engine and check for proper functioning.
Check for proper functioning of charging system.
PARTS / WASTE DISPOSAL
Discard according to applicable environmental regulations (Municipal/State[Prov.]/ Federal)
Access all our Service Bulletins on
http://prevostparts.volvo.com/technicalpublicatios/en/pub.asp
Or scan the QR-Code with your smart phone.
E-mail us at
and type “ADD” in the subject to
receive our warranty bulletins by e-mail.
