SECTION 18: BODY
46
DOB 2490-2789 | X3-45 Commuter PA1605 Maintenance Manual (Final Version – Rev.2 April 2016)
The small door has a piano hinge on its lower
edge.
1. Install only two of the mounting screws, at
each end to adjust the door.
2. Close door and adjust in opening. A 1mm
maximum difference between left and
right measured gap is accepted.
3. Door should close flush with the larger
door panel. Maximum flatness deviation
within 1mm.
4. Install the remaining screws and seal with
liquid Teflon #680098.
WCL Cassette Door latch adjustment
To allow adjustment of the latch mechanism,
lightly tighten the retaining hardware on
receptacle and striker support (arrows).
1. Place centering tool G34148_500 in the
receptacle cavity.
2. Close the door to center the latch mecha-
nism.
3. Tighten
screws
4. Check that the door swings freely and
closes properly without interference or
excessive force
