SECTION 18: BODY
DOB 2490-2789 | X3-45 Commuter PA1605 Maintenance Manual (Final Version – Rev.2 April 2016)
31
If applicable, remove plastic film at the
bottom of driver’s window.
Remove excess of Sika underneath
driver’s window.
Clean bottom of driver’s window using
window cleaner.
Apply Sika Aktivator at the bottom of
driver’s window.
Install gutter under driver’s window then
compress in order to fix double face self-
adhesive tape.
Install 3 clamps and allow curing for 4
hours.
15.1.8 FRONT
CAP
The fiberglass front cap does not need any
maintenance except painting as needed. It is
held in place with adhesive. If ever it has to be
replaced, make an appointment at a Prévost
service center near you. For minor damages,
refer to section 4 "Fiberglass Repair" and
section 5 "Painting".
Straighten here
