SECTION 11: REAR AXLES
DOB 2490-2789 | X3-45 Commuter PA1605 Maintenance Manual (Final Version – Rev.2 April 2016)
11
NOTE
It may be necessary to adjust the axle TOE as
well as its alignment. In this case, insert shims
(7 min. - P/N 121203 or 15 min. - P/N 121240)
in between mounting plate and spindle, as
required.
If axle has been removed for repair or servicing
and if all parts are reinstalled exactly in their
previous locations, axle alignment is not
necessary. However, if the suspension supports
have been replaced or have changed position,
proceed with the following instructions to verify
or adjust the tag axle alignment.
3. SPECIFICATIONS
Drive Axle
Make and model ....................................................................................................................................... ZF A132
Drive track ........................................................................................................................ 76.7 inches (1 949 mm)
Gear type .................................................................................................................................................... Hypoid
Axle type .............................................................................................................................................. Full floating
Oil fill quantity ...................................................................................................................... 19.5 quarts (39 pints)
Ratio ................................................................................................................................................................. 3.82
Tag Axle
Make .......................................................................................................................................................... Prevost
Rear track ........................................................................................................................ 83.6 inches (2 124 mm)
Axle type ..................................................................................................................................................... Forged
NOTE
The tag axle alignment consists in aligning the tag axle parallel to the drive axle.
4. SECTION
CHANGE
LOG
DESCRIPTION
DATE
1
2
3
4
5
6
