Power Electronics SD 300 Series, Getting Started Manual

Page: 295 / 354

POWER ELECTRONICS SD300
COMMONLY USED CONFIGURATIONS
293
Parameter
Default
value
Description Set value
dr.15 0 Torque boost
0: Manual torque (Both directions can be
configured separately, in dr.16
➔
‘Start torque in
forward direction’ and in dr.17
➔
‘Start torque in
reverse direction’).
1 and 2: The drive automatically calculates the
voltage to apply at the start using the motor
parameters.
dr.18 60.00Hz Motor frequency 50.00Hz
dr.19 0.50Hz Start frequency 0.10Hz
dr.20 60.00Hz Max speed limit 50.00Hz
dr.93 0 Parameter initialization
1: Set parameters back to their factory value
(only if required).
dr.97 2.x Software version -
Cn.4 3kHz Modulation frequency 5kHz
In.1 50.00Hz Analog input max. freq 50.00Hz
In.7 10 V1 filter 10ms (Low Pass Filter for V1).
In.8 0V V1 minimum voltage 0.00V (V1 minimum voltage adjustment).
In.9 0.00 V1 minimum reference 0.00 (% of the value set in In.1)
In.10 10V V1 maximum voltage 10.0V (V1 maximum voltage adjustment).
In.11 100.00 V1 maximum reference 100.00 (% of the value set in In.1)
In.52 10ms I2 filter 10ms (Analogue input current filter).
In.53 4.00mA I2 minimum current 4.00mA (I2 minimum current adjustment).
In.54 0.00 I2 minimum reference 0.00 (% of the value set In.1)
In.55 20.00mA I2 maximum current 20.00mA (I2 maximum current adjustment)
In.56 100.00 I2 maximum reference 100.00 (% of the value set In.1)