Power Electronics SD 300 Series, Getting Started Manual

Page: 302 / 354

SD300 POWER ELECTRONICS
300
COMMONLY USED CONFIGURATIONS
Programmed
frequency
Parameter
High speed
(P7)
Medium
speed (P6)
Low speed
(P5)
50.00Hz 0.00 0 0 0
30.00Hz St1 0 0 1
35.00Hz St2 0 1 0
40.00Hz St3 0 1 1
45.00Hz bA.53 1 0 0
50.00Hz bA.54 1 0 1
47.00Hz bA.55 1 1 0
42.00Hz bA.56 1 1 1
Connection scheme
Terminals CM/P1: Start command (NO state).
Terminals CM/P5: Low speed (Low bit) (NO state).
Terminals CM/P6: Medium speed (Medium bit) (NO state).
Terminals CM/P7: High speed (High bit) (NO state).
Multi-speed commands (multi-step frequencies) using P5, P6 and P7