Power Electronics SD 300 Series, Getting Started Manual

Page: 12 / 354

SD300 POWER ELECTRONICS
10
SAFETY INSTRUCTIONS
NOTICE
RECEPTION
•
The SD300 are carefully tested and perfectly packed before delivering.
•
In the event of transport damage, please ensure to notify the transport
agency and POWER ELECTRONICS: 902 40 20 70 (International +34 96
136 65 57), or your nearest agent, within 24hrs from receiving the goods.
UNPACKING
•
Make sure model and serial number of the variable speed drive are the
same on the box, delivery note and unit.
•
Each variable speed drive is delivered with Hardware and Software
technical manuals.
RECYCLING
Equipment packaging must be recycled. Separate all different materials (plastic,
paper, cardboard, wood…) and place them in the corresponding containers.
Ensure waste collection is properly managed with a Non-Hazardous Waste
Agent.
To guarantee health and natural environmental sources protection,
the European Union has adopted the WEEE directive concerning
discarded electric and electronic equipment (SEEA).
Waste of electrical and electronic equipment (WEEE) must be
collected selectively for proper environmental management.
Our products contain electronic cards, capacitors and other
electronic devices that should be separated when they are no longer
functional. These WEEEs should be managed accordingly with a
Hazardous Waste Agent.
Power Electronics promotes good environmental practices and
recommends that all its products sold outside of the European Union,
once they reach the end of their life, are separated and the WEEE
managed according to the particular country applicable legislation
(especially: electronic cards, capacitors and other electronic
devices)
If you have any questions about the electric and electronic equipment waste,
please contact Power Electronics.