Power Electronics SD 300 Series, Getting Started Manual

Page: 338 / 354

SD300 POWER ELECTRONICS
336
CONFIGURATION REGISTER
PARAMETER
DEFAULT
VALUE
SETTING 1 SETTING 2
AP.43
PID unit gain
100.00% ___________________ ___________________
AP.44
PID scale unit
x1 ___________________ ___________________
AP.45
Proportional gain 2
100.0% ___________________ ___________________
Pr: Protections
Pr.4
Load duty type
Heavy ___________________ ___________________
Pr.5
Phase loss type
NONE ___________________ ___________________
Pr.6
Ripple voltage
15V ___________________ ___________________
Pr.7
Fault deceleration time
3.0s ___________________ ___________________
Pr.8
Start after restart
N ___________________ ___________________
Pr.9
Retry attempts number
0 ___________________ ___________________
Pr.10
Retry delay
1.0s ___________________ ___________________
Pr.12
Response in case of a speed
reference loss
None ___________________ ___________________
Pr.13
Lost reference delay
1.0s ___________________ ___________________
Pr.14
Reference for lost reference
0.00Hz ___________________ ___________________
Pr.15
AI Lost Level
Half ___________________ ___________________
Pr.17
Overload warning select
YES ___________________ ___________________
Pr.18
Overload warning level
+150% ___________________ ___________________
Pr.19
Overload warning time
10.0s ___________________ ___________________
Pr.20
Overload trip select
FreeRun ___________________ ___________________
Pr.21
Overload level
180% ___________________ ___________________