Power Electronics SD 300 Series, Getting Started Manual

Page: 152 / 354

SD300 POWER ELECTRONICS
150
DESCRIPTION OF PROGRAMMING PARAMETERS
Screen Description
Default
value
Range Function
Set on
RUN
Cn.55
[19]
Forward
negative
torque limit
180.0%
0.0 to
200.0%
The user can set the forward regeneration
operation torque limit whenever the torque
limit reference has been set as LOCAL
YES
Cn.56
[19]
Reverse
positive torque
limit
180.0%
0.0 to
200.0%
The user can set the reverse motoring
operation torque limit whenever the torque
limit reference has been set as LOCAL
YES
Cn.57
[19]
Reverse
negative
torque limit
180.0%
0.0 to
200.0%
The user can set the reverse regeneration
operation torque limit whenever the torque
limit reference has been set as LOCAL
YES
Cn.62
[19]
Speed limit
reference
LOCAL 0 to 8
Select the source to introduce the speed
limit reference.
OPT. DESCR. FUNCTION
0 LOCAL
Reference will be given by
keypad and will be set in
dr.1.
2 V1
Reference will be
introduced through the
voltage analog input 1.
4 V2
Reference will be
introduced through the
voltage analog input 2.
5 I2
Reference will be
introduced through the
current analog input 2.
6
MOD
BUS
The reference will be
introduced
through
Modbus.
7
COMM
S
The reference will be
introduced through the
communications.
8 PLC
The common area can be
linked with user sequence
output and can be used as
command.
NO
Cn.63
[19]
Forward
speed limit
60.00Hz
0.00 to
400.00H
z
The user can set the forward speed limit
whenever the speed limit reference has
been set as LOCAL.
YES
Cn.64
[19]
Reverse
speed limit
60.00Hz
0.00 to
400.00H
z
The user can set the reverse speed limit
whenever the speed limit reference has
been set as LOCAL.
YES