Power Electronics SD 300 Series, Getting Started Manual

Page: 239 / 354

POWER ELECTRONICS SD300
MODBUS COMMUNICATION
237
Modbus Address
Parameter Scale Units Values
Decimal Hexadecimal
40916 0h0394
Torque limit
negative reverse
0.1 %
Regenerative torque limit in
reverse direction
40917 0h0395 Torque bias 0.1 % Torque bias
Memory Control Area
NOTE : These parameters are read and write.
Modbus Address
Parameter Scale Units Set on
run
Function
Decimal Hexadecimal
40992 0h03E0 Save parameters - - YES 0: No, 1: YES
40993 0h03E1
Monitor mode
initialization
- - NO 0: No, 1: YES
40994 0h03E2 Initialize parameters - - YES
0: No, 1: All.
By groups:
2: Operation, 3: bA, 4:
Ad, 5: Cn, 6: In,
7: OU, 8: CM, 9: AP,
12: Pr, 13: M2.
Note : Setting is
prohibited during fault
trip interruptions.
40995 0h03E3
Display changed
parameters
- - NO 0: No, 1: YES
40997 0h03E5 Delete fault history - NO 0: No, 1: YES
40998 0h03E6
Delete user registered
codes
- NO 0: No, 1: YES
40999 0h03E7 Hide parameter mode 0 Hex NO
Write: 0-9999
Read: 0: Unlock, 1:
Lock
41000 0h03E8 Lock parameter mode 0 Hex NO
Write: 0-9999
Read: 0: Unlock, 1:
Lock
41001 0h03E9 Easy parameter setup - - NO 0: No, 1: YES
41002 0h03EA
Initialize power
consumption
- - NO 0: No, 1: YES
41003 0h03EB
Initialize operation
accumulative time
- - NO 0: No, 1: YES
41004 0h03EC
Initialize fan operation
accumulative time
- - NO 0: No, 1: YES