manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 93

1-81

Third Row (Stowable Seat)

Don’t use a child restraint with a top strap in the right
front passenger’s position because there’s no place to
anchor the top strap.

Anchor the top strap to one of these anchor points. 
Be sure to use an anchor point located on the same side
of the vehicle as the seating position where the child
restraint will be placed. Raise the head restraint and
route the top strap under it.

Once you have the top strap anchored, you’ll be ready to
secure the child restraint itself. Tighten the top strap
when and as the child restraint manufacturer’s
instructions say.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands