manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 267

3-36

Using Song List Mode

The integrated 6

-

disc CD changer has a feature 

called song list. This feature is capable of saving
20 track selections.

To save tracks into SONG LIST perform the 
following steps:

1. The disc player must be on with at least one disc

loaded. See “LOAD/EJECT” previously for 
more information.

2. The disc changer must not be in song list mode.

S

-

LIST should not appear in the display. If S

-

LIST

is present, press SONG LIST to turn it off.

3. Select the desired disc by pressing the numbered

pushbutton and then use the SEEK SCAN right
arrow button to locate the track that you want to
save. The track will begin to play.

4. Press and hold SONG LIST for two or more seconds

to save the track into memory. When SONG LIST 
is pressed a beep will be heard immediately. After
two seconds of pressing SONG LIST continuously,
two beeps will sound, to confirm that the track has
been saved.

5. Repeat Steps 3 and 4 for saving other selections.

To play the song list, press SONG LIST. One beep will
be heard and S

-

LIST will appear on the display.

The recorded tracks will begin to play in the order that
they were saved.

You may seek through the song list by using the SEEK
SCAN arrows. Seeking past the last saved track will
return you to the first saved track.

To delete tracks from SONG LIST perform the
following steps:

1. The disc player must be turned on.

2. Press SONG LIST to turn song list on. S

-

LIST will

appear on the display.

3. Press the SEEK SCAN arrows to select the desired

track to be deleted.

4. Press and hold the SONG LIST button for two

seconds. When pressing SONG LIST one beep will
be heard immediately. After two seconds of pressing
the SONG LIST button continuously, two beeps will
be heard, to confirm that the track has been deleted.

After a track has been deleted, the remaining tracks are
moved up the list. When another track is added to the
song list, the tracks will be added to the end of the list.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands