manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 344

5-31

5. Make sure the tire is stored securely. Push, pull, and

then try to rotate or turn the tire. If the tire moves,
use the folding wrench to tighten the cable.

Put back all tools as they were stored in the jack storage
compartment and put the compartment cover back on.

To put the cover back on, line up the tabs on the right of
the cover with the slots in the cover opening. Push the
cover in place and push down the tab so that it rests in
the groove. This secures the cover in place.

A. Strap

B. Bag and Tools

C. Jack

Unless you have the plastic “bolt

-

on” wheel covers, be

sure to also store the center cap. When you replace the
compact spare with a full

-

size tire, reinstall the bolt

-

on

wheel covers and the center cap. Tighten them “hand
tight” over the wheel nuts, using the folding wrench.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands