manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 171

2-59

If a bulb is burned out, replace it to help avoid an
accident. If the arrows don’t go on at all when you
signal a turn, check for burned

-

out bulbs and check the

fuse. See “Bulb Replacement” and “Fuses and Circuit
Breakers” in the Index.

If you have a trailer towing option with added wiring for
the trailer lamps, the signal indicator will flash at a
normal rate even if a turn signal bulb is burned out.
Check the front and rear turn signal lamps regularly to
make sure they are working.

Turn Signal On Chime

If either turn signal is left on for more than 3/4 mile 
(1.2 km), a chime will sound to let the driver know to
turn it off.

If you need to leave the signal on for more than 3/4 mile
(1.2 km), turn off the signal and then turn it back on.

Headlamp High/Low-Beam Changer

To change the headlamps from high to low beam, or low
to high, simply pull the turn signal lever all the way
toward you. Then release it.

When the high beams are
on, this light on the
instrument panel cluster 
will also be on.

Your fog lamps will turn off when you switch to high
beams. Using your high beams in fog is not recommended.

Flash-to-Pass

When the headlamps are off, pull the lever toward you
to momentarily switch on the high beams (to signal that
you are going to pass). When you release the lever, they
will turn off.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands