manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 239

3-8

Rear Air Vents

To maximize airflow through the rear heater outlet,
place the left bucket seat in the second row in the
forward position. See “Adjusting Rear Seats” in 
the Index.

The vent behind the left rear seat is the cold air return
vent. Be sure to keep it free of obstructions.

Keep the area around the base of the center instrument
panel console, between and under the front seats, free of
objects that could obstruct airflow to the rear.

Ventilation System

Your vehicle’s flow

-

through ventilation system supplies

outside air into the vehicle when it is moving. Outside
air will also enter the vehicle when the fan is running.

Your vehicle has air outlets that allow you to adjust the
direction and amount of airflow inside the vehicle. Push
the outlet up or down to change the direction of the air
flow. Increase or reduce the amount of airflow by
opening and closing the louvers. Opening and closing
the louvers will also direct airflow from side to side.

The air

-

flow through the vents can be shut off

completely by turning the thumbwheel next to each
outlet all the way down. You can also stop outside air
from entering the vehicle by turning the fan to OFF and
pushing the RECIRCULATION button.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands