manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 44

1-32

Q:

If I’m a good driver, and I never drive far from
home, why should I wear safety belts?

A:

You may be an excellent driver, but if you’re in an
accident 

--

 even one that isn’t your fault 

--

 you and

your passengers can be hurt. Being a good driver
doesn’t protect you from things beyond your
control, such as bad drivers.

Most accidents occur within 25 miles (40 km) 
of home. And the greatest number of serious
injuries and deaths occur at speeds of less 
than 40 mph (65 km/h).

Safety belts are for everyone.

How to Wear Safety Belts Properly

Adults

This part is only for people of adult size.

Be aware that there are special things to know about
safety belts and children. And there are different 
rules for smaller children and babies. If a child will 
be riding in your vehicle, see the part of this manual
called “Children.” Follow those rules for 
everyone’s protection.

First, you’ll want to know which restraint systems your
vehicle has.

We’ll start with the driver position.

Driver Position

This part describes the driver’s restraint system.

Lap-Shoulder Belt

The driver has a lap

-

shoulder belt. Here’s how to wear 

it properly.

1. Close and lock the door.

2. Adjust the seat so you can sit up straight. 

To see how, see “Seats” in the Index.

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands