manualshive.com logo in svg

Pontiac 2001 Montana, Owner'S Manual

Share
Download
Pontiac 2001 Montana Owner'S Manual Download Page 360

6-14

What Kind of Engine Oil to Use

Oils recommended for your vehicle can be identified by
looking for the starburst symbol.

This symbol indicates that the oil has been certified by
the American Petroleum Institute (API). Do not use any
oil which does not carry this starburst symbol.

If you change your own oil,
be sure you use oil that has
the starburst symbol on the
front of the oil container. 
If you have your oil
changed for you, be sure 
the oil put into your engine
is American Petroleum
Institute certified for
gasoline engines.

You should also use the proper viscosity oil for your
vehicle, as shown in the following chart:

Summary of Contents for 2001 Montana









































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands